Flushing the toilet after a quick trip to the restroom could cause a backup or, even worse, a nearly full toilet. If you do not have a plunger, or using one does not work, you may want to try other solutions before giving up and calling a plumber.

Repairing an overflowing or blocked toilet can be done in a variety of ways and often requires nothing more than what you would find in a medicine cabinet or bathroom drawer. If you want to know what to do if your toilet is clogged, then you can follow the below mentioned steps.

#1. Extreme heat

The first option for clearing a blocked toilet drain cleaning process is to fill a pan with boiling water. You can warm it up on the stove or in the microwave, but it shouldn’t boil. If the clog persists after you pour it down the drain and then you must leave your toilet for g a few minutes to work, try another method. Make sure, you must use warm water to clean the toilet if you have PVC pipes because your pipes can get affected by hot water.

The water should start to drain if your efforts were successful. After that, you can flush the toilet and clean it completely.

#2. Multi-tasking soap

The second option for clearing a blocked toilet drain cleaning process is to visit the kitchen for a quick solution to a clogged toilet. Mix a few drops of dishwasher with warm water. If the drain is clogged, let the soapy water run for 5-10 minutes. The dish should be heated in a water bath at a moderate temperature (not boiling) for a few minutes. You may restore water flow in a clogged toilet drain by using dish soap.

#3. Science attack

The third option for clearing a blocked toilet drain cleaning process is to put those science skills from grade school to good use! Overflow can occur if the water level in the toilet bowl is very close to the top. One cup of baking soda and one cup of vinegar should then be added. The combination of vinegar and baking soda will produce carbonation, which will help to loosen the obstruction. After waiting 30 minutes, try flushing it out with hot water. If it still doesn’t work, you’ll have to call a professional plumber to unclog your toilet.

#4. Scuffles vs. Brushes

You shouldn’t have to be in a scuffling match with your toilet pot. The next option for clearing a blocked toilet drain cleaning process is to use a brush. In the absence of a plunger, you can use the bristles of a toilet brush to clear the clog. Those who are easily grossed out would not like this at all. To clear the blockage and speed up the drainage, all it takes is a few up-and-down pumps.

#5. Hangers are useful outside of the closet

The next option for clearing a blocked toilet drain cleaning process is to use a wire hanger as a makeshift drain snake if you don’t have one. To straighten a hanger, just take it off the hook and unwind it. Protect your porcelain from unsightly scratches by wrapping the hook in fabric first. When the water level in the bowl starts to go down, flush the toilet several times to make sure it’s clean and empty.

#6. Toilet holds a bomb

The next option for clearing a blocked toilet drain cleaning process is to use two cups of baking soda, a quarter cup of Epsom salt, and eight to ten tablespoons of dish detergent are all you need to make your drain cleaners (add one tablespoon at a time). Leave the ingredients in the muffin tins overnight to dry and drop one into the bowl of the bathroom toilet along with four glasses of water in the morning and watch what happens over a few hours.

#7. Vacuum to rescue

The last option for clearing a blocked toilet drain cleaning process is to be used if everything else fails. Consider renting a wet/dry vacuum from a home improvement store in the area. Remember that a regular vacuum cleaner won’t work and you must use a wet/dry vacuum cleaner to clean your toilet.

You cannot unclog your toiler is there is any clogs at the underground level, and you must call a plumber to clean your toilet professionally.